How To Repair Vintage Vinyl Chair

You may have a piece of piece of furniture that you beloved that has vinyl upholstery that you don't. Reupholstering pieces tin can exist a lot of work. Good news: You lot can go a new, fresh look on your vinyl furniture merely by painting the vinyl upholstery! I have had a pair of blackness vinyl barstools for years and, while they weren't terrible, they were simply too dark for my basement kitchenette. I wanted them lightened and brightened.

Painting Vinyl Upholstery – Step-past-Step Instructions to Brighten Upwardly Your Furniture

DIY Level: Beginner

Materials Needed to Paint Vinyl Upholstery:

Vinyl upholstered piece of furniture
Spray pigment – paint + primer that adheres to plastic. Krylon and Rustoleum are 2 brands that carry this type of spray pigment

Notes:

Some things yous should know before embarking on this DIY projection:

Painting on firmly padded (as in, not soft) vinyl seating will have better results than painting on vinyl that is required to give and flex a great deal.
Vinyl is plastic. Therefore, spray paint that specifically adheres to plastic should work for this project.
Material spray paint is more flexible than any other spray paint, simply it is more expensive. This DIY project is done with plastic-adhering spray paint. The longevity of your project might exist extended if you opt for cloth spray paint.

How to pigment a chair: step by stride tutorial

Stride ane: Move your piece of furniture item to a well-ventilated area.

I carried my barstools out to the garage and placed them on some well-used driblet cloths. Find somewhere that is out of the way from the rest of your household, and so no one else will have to experience the fumes from the vinyl spray paint.

Step ii: Clean furniture thoroughly with a grease cutter.

I used LA's Totally Awesome cleaner, and it did a fantastic chore of cleaning things up. A product like Krud Kutter would produce great results as well. Let the furniture dry thoroughly.

Step iii: Paint a thin base of operations coat onto furniture.

I used Krylon Colormaster paint + primer in Classic Grey because it adheres to plastic and because the color option matched what I had in mind better than Rustoleum. Tip: As you spray, push button the nozzle while you're aiming the spray can slightly off the edge of the slice, and so move the spray lightly over the furniture. This prevents paint pooling.

Step iv: Allow the base of operations coat to dry out.

Focus on keeping the base coat sparse rather than even. The coverage won't exist fifty-fifty with your base coat, and that's just fine! Tip: The thinner your individual coats of paint, the ameliorate they volition adhere to the vinyl. (And the less likely they will be to crack.)

Pace 5: Paint additional coats as needed.

Pigment i sparse coat at a fourth dimension until the entire furniture slice is evenly covered. I did three coats on my barstools. Let dry thoroughly. Of class, this part of the process will take a good length of time, every bit you will demand to let the vinyl paint dry very well between each coat. Hopefully, you've left your project in an area of your dwelling house where it'south out of the manner, and so y'all can accept your fourth dimension with the painting process.

Step half dozen: Get creative!

Of course, you could easily be done with painting your vinyl upholstery subsequently step 5. But I wanted to add together a little more personality to my barstools. I decided to create an ombre event, with some cobalt blue on the tips of the legs and moving up gradients into white at the top of the barstool seat dorsum.

Hither is a closer look at the seatback. Tip: Ombre is spray painting's best friend. If you're wondering how to paint a chair using the ombre upshot, call up to go on all paint sprays light, and E'er start and end your spray while aiming at the air near, not at, the furniture. More than solid components of ombre should be done with a higher number of low-cal coats – not heavier coats – than the gradient sections.

I carried some of the white paint onto the barstool seat too, to create an overall ombre consequence. I also added a fourth "color," Smoke Gray, which is slightly darker than the Archetype Grey of the base coat, to create more than depth within that massive sea of gray on the chair. It'due south subtle merely important.

Footstep vii: Let everything dry.

It's hard to look, I know. But have this opportunity to clean up the expanse where your new favorite vinyl furniture is going to live.

Ombre painted legs resemble dipped chair legs. They really add together a unique addition to the chair and are one of my favorite features of this vinyl pigment project.

Painting your vinyl furniture is such an like shooting fish in a barrel way to bring new life to an old stool or chair that may otherwise be headed for the trash. While you may demand a fiddling time to consummate this projection, it's well worth it for the final event. Attempt to notice a good space in your home where your piece of furniture can dry betwixt coats of paint, and make sure that it's well-ventilated for working in. Nosotros love refreshing one-time furniture, and using vinyl spray pigment is a much more cost-constructive and environmentally-friendly selection than just buying something new every time you are tired of an detail in your habitation.

Decision

Hope you learned how to pigment a chair with this unproblematic DIY project! This idea would as well expect great as a vertical or horizontal stripe, a buffalo check, an abstract, a geometric…the sky'south the limit, really. Have fun with this!